LRS608 Long Range Strobe Lights

Long Range Strobe Light:

Designed to replace high power xenon strobes, this affordable LED strobe light can project a beam of light to over 100 feet to illuminate a small target.  The Long-Range Strobe Light features a weatherproof enclosure. Strobe pulse widths are adjustable from 2µs to 250µs with pulse rates up to 50kHz. Strobe controls include intensity, strobe rate, trigger delay, etc.  Integrated mounting hardware is included to assist with installation in virtually any environment. The LRS can be triggered remotely via a camera’s strobe output signal.  Our thermal management technology assures an ultra-fast recharge to allow the strobe to fire at rates up to 50kHz for high-speed digital photography or video use. The Long-Range Strobe Light is available in Narrow beam, suitable for monitoring one traffic lane at 100 feet or Wide beam, suitable for monitoring 4 traffic lanes at 40 feet. Custom beam widths are available.

SPECIFICATIONS
GENERAL
Supply Voltage	24VDC ±10%, 6 amp switching power supply recommended
Trigger Input:
Optically Isolated	Yes
Voltage	3V to 24V
Current	7mA typical, 10mA max
Rate	50kHz maximum
Pulse width	2µs minimum, 250µs maximum
Edge/Polarity	Rising or Falling Edge (Strobe Mode) High or Low-Level On (DC Current Mode)
Ethernet Control:	UDP messaging listening on port 5000 for any incoming source port
IP Address	User selectable. Defaults to 172.16.1.1
Operating Modes	Strobe (Pulse), DC Current, DC Voltage
ROHS Compliance	Yes
Expected Lifetime	75,000 hours
Mounting	Pelco style swivel base
Operating Temperature	-34°C to 48.8°C (-29°F to 120°F)
Operating Humidity	0% to 85% RH non-condensing
IP Rating	IP66 (NEMA 4X enclosure)

Multilane Wide angle beam focusing optics	Multilane Narrow angle beam focusing optics