DDL-100-530 100mm Dome Light

DDL Dome Light SeriesProduct Details

• 5 Pin M12 Quick Disconnect
• Driver built in - No External wiring to a driver
• NPN or PNP Signal Options
• Analog Intensity 0-10VDC Signal
• 100mm Dome Diameter
• 25mm Camera Viewing Hole
• Continuous Operation or OverDrive Mode
• Easy mounting with 6 T-slots

DDL Dome Light Series OVERVIEW
The DDL Dome Light Series are designed to read code and imperfections on rounded or highly reflective products and product inspection with an even, uniform, and repeatable light intensity. The DDL Dome Lights feature our Multi-Drive™ controller and built-in driver. The Multi-Drive™ controller combines the Constant ON operation and OverDrive Strobe (high pulse operation) into one easy to use product. The Multi-Drive™ controller allows the user to run the product in Constant ON operation or pulse/strobe the light at the maximum allowed intensity by the LED manufacturer by simply setting the product parameters. The built-in Multi-Drive™ also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.

DDL-100 DOME LIGHT
The DDL-100 Series is a diffuse 4" dome light. The 20 LED design and the constant current regulation the built in driver provides along with the semi-reflective white dome further backs the DDL-100 light's performance. The DDL-100 was designed with simplicity and functionality in mind. Built in constant ON operation and OverDrive Strobe technology allows for use in either operation depending on wiring method. NPN and PNP strobe operation with a built in 0-10VDC analog intensity control allows for further versatility. The industry standard 5-pin M12 connector makes for easy installation.

LIGHT OUTPUT CUTAWAY
The dome shape gives this product a particular advantage in uniformity when illuminating and reading OCR codes on reflective or round surfaces.

Wavelength Colors

Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Operation

MOUNTING
Standard industrial T-slots on each side accepts T-Nuts
Includes (2) T-nuts and (2) screws

(DDL-150 Shown in Image)

OPTIONAL CAMERA BRACKET
The DDL Series offers a specially designed camera mounting bracket and an optional right angle bracket. Multiple adjustment points means maximum mounting versatility between camera manufacturers. Mounting hardware included

Part No: BKT0007